The links below correspond to screens in the software.
Assets and Liabilities
On this screen, you enter the assets and liabilities (debts) of the parties.
Click the buttons to add an asset.
Once there is an asset in a particular category, you will be able to open and close the group of assets by clicking the triangle to the left of the asset category (Real Estate, Investments, Debts, etc.).
The software allows you to prepare financial affidavits for both parties. This is useful, for example, in a collaborative or mediation situation, where the same case file is being used for both parties.
Unless you specify to the contrary, the full value of each asset will carry to each party's financial affidavit.
(There is an special case for Connecticut. At the top of the Assets & Debts screen, you will be able to specify that you want 50% of the value of each asset to carry to the party's Financial Affidavit.
On the "more info" screen for each asset or debt, there is a checkbox to specify that you do not want the item to carry to either party's financial affidavit.
Note at the top of the screen three sets of checkboxes.
These control what fields appear at the top level, and they can make a big difference in the ease of use of the software.
The exactnature of these check boxes varies from state to state, but in general the idea is for you to specify whether you arepreparing the financial affidavit or entering complete data for negotiation.
Once you specify that, the fields at the top level that appear will be customized to your purpose.You can switch back and forth.
The more info button will take you to a screen that shows all of the fields for the asset, regardless of what approach you have selected for display at the top level.
Fields shown at the top level when you are preparing the financial affidavit include the investment type, title, and the party on whose affidavit an asset should appear.
If you are a financial planner, you probably want to click the box for the financial planning.
That will cause fields that are useful in financial planning, such as tax category and tax basis to appear at the top level.
Again, all fields always appear at the "more info" level.
You get to the "more info" level by clicking the green 3-dots button (Cloud) or the link labeled "more info" (desktop) next to the asset.
Under Data Entry Options, the first set of checkboxes at the top of the screen gives you the option to show or hide fields for separate property and the valuation date.
The third line relates to property division.
When you first enter an asset, by default, it is not allocated to either party.
However, this row of checkboxes allows you to automatically allocate a new asset that you create 50/50 between the parties, or to allocate the asset to match the title of the asset.
This allocation is just a default. You can change it for each asset that you enter simply by typing over it.
For each asset, you can specify who has legal title to the asset. For space, we often show just two letters.
By default, these are the parties' initials. But you can change that, here.
This setting affects only the display on this screen, not anything on the printed financial affidavit.
After you have entered more than one asset in a particular category, you will see a little button with up and down arrows.
If you click that button, a dialog box will pop up which will allow you to change the sequence of assets within a category.
This will then change the order in which the assets in the category are listed on the Marital Property Division report or on the financial affidavit.
If you specify that you are preparing the financial affidavit, the affidavit categories in many states will change to match the categories on that state's financial affidavit.
In order to discuss the assets in a way that applies to all states, we will use the organization that is shown when you select that you are working on the financial plan.
Click the button to add a real estate property.
At the top level, you are asked about the value, percent ownership, mortgage, and other fields.
You may enter these in any order, and leave blank the ones you do not know.
To enter more information about the asset, click "more info."
To show separate property or valuation date, click the relevant checkboxes at the top of the page, or click "more info" for the asset.
When you identify an asset, you should use the last four digits of the account number, only. For the client's security, do not enter any more than that.
Be sure to enter the "% to [party]" entry. This is how the software figures out the amount of the asset's income to carry to the financial affidavit.
If you see an "Investment type" column, be sure to select it. That entry determines where on the financial affidavit the asset carries.
Click "more info" to enter information including the rates of return and appreciation on the asset, and to specify if the asset is an RSU or stock option.
Also on the "more info" screen, you can specify that an asset is a child's asset.
A child's asset will carry to the financial affidavit, but it will not appear on the Marital Property Division report, or any property reports in the software.
When you identify a debt (bank debt, credit card, etc.), please use only the last four digits of the account number. For the client's security, do not enter any more than that.
Do not enter mortgages as debts. Enter mortgages with the associated real estate property. This is so that we can correctly handle the tax impact of the mortgage interest.
In general, it is better to enter car loans as liens on the "more info" screen for the Personal Property item where you list the vehicle. Then the net value of the vehicle will flow to the financial affidavit.
Be sure to enter the "% paid by [party]" entry. This is how the software figures out the amount of the debt payment to carry to the financial affidavit.
For example, if the monthly payment on the debt is $1,000, and the percent paid by Party A is 50%, then $500 will flow to the financial affidavit of Party A, and $500 will flow to the financial affidavit of Party B.
If this field is blank, then, by default, 100% of the value will flow to the financial affidavit of Party A.
You enter the total payment and the % paid by party. That way, you can enter the monthly payment at the outset. As you negotiate who will pay the debt, you can easily change the cash flows by just entering a different "% paid by party."
If you see a "Debt type" column, be sure to select it. That entry determines where on the financial affidavit the asset carries.
Click "more info" to enter information such as whether the debt will be paid with a bullet payment, or whether the debt has been in existence since the beginning of the year.
Typically, the % to [party] will be 100% or 0%.
If you see an "Asset Type" selection, be sure to click it. That is the way to specify where on the financial affidavit the value will carry.
If you enter a vehicle, please be sure to enter the car loan associated with the vehicle. This may show up at the top level, or you may need to click "more info" to enter it.
In general, the net value of the vehicle will flow to the financial affidavit. In some states, the total value and the lien will each flow.
At the top level, you can enter the value and contribution of each party to the IRA or 401(k).
The contribution typically does not carry to the financial affidavit, because it is not considered as an expense, but rather as a transfer of money from one pocket to another.
(With respect to the Budget Report, if you click the link at the top of the screen for options, you will see an option to include or exclude this contribution as an expense.)
If you are doing financial projections, you will definitely want to explore the "more info" screen for this asset account.
You can specify things like the amount of employer match, annual growth in contributions, current year early distributions, and regular distributions.
You can also specify an annual percentage growth in account contributions, subject to a maximum.
The software is not calculating the maximum allowable contribution either to IRA or 401(k) plan. There are so many possible types of accounts and situations that it is beyond the scope of the software to calculate them all.
We leave it to you to assure that the contributions made by the parties are within the legal limits.
If you want to understand how the IRA is growing, and then having distributions flow from it, click Forms & Reports > More Reports > For Planners, and select the report entitled "IRA/401k Assets."
Life Insurance policies fall in two general categories: term and whole life.
The difference is that whole life has an investment component. Over time, it builds a value that can be cashed out, independently of the death of the insured individual.
Term life insurance is simply a contract that the life insurer will pay a specified amount upon the death of the insured. It does not have a value. If this is a term life policy, enter zero as the value.
You may enter life insurance premiums here, with the asset, or on the income & expenses page.
For term life insurance, entering on the expenses page might be better, because there is no asset value.
The entries for the business will help the software apply the correct tax treatment applied to the income, as well as preparing the financial affidavit.
For this reason, you specify a business type (sole proprietorship, partnership, etc.), as well as value and other factors.
For a business, you enter two allocations: a % ownership (party ownership percentage of marital equity) and a % of income (percent of the business's net income that is being kept by a party).
This is because often the income of a business is distributed differently than the ownership.
The software is also automatically preparing the pass-thru income tax deduction. You can see that worked out on the "more info" page for the business.
The software can value a defined benefit pension.
Its valuation is actuarially precise. As long as the pension is of a straightforward variety, the software's valuation is as good as a valuation from an outside appraiser.
By "straightforward," we mean that the pension is paid starting at a specific date, continuing for the life of the individual, and increasing by a cost of living adjustment (which may be zero).
The valuation can also handle varying discount rates.
Enter the person who owns the plan (the participant) at the top level, then click "more info."
money, possibly over a period of time, to help resolve the property negotiation.For that reason, it is called a Property Settlement.
Typically, property settlements are paid over time, so you specify the number of years and interest rate.
If the payment is all being paid in one year, enter the year as the Start Year, enter the number of years as one, and enter the interest rate as zero.
The amount that you enter as a Property Settlement will appear on the Marital Property Division report, as an asset of the recipient and an obligation of the payer.
If you specify that the Property Settlement is a Reimbursement, everything is the same except for how it appears on the Marital Property Division report. Reimbursements are not counted towards the equalization amount on the marital property division report. They are listed separately at the bottom.
You also have an option to exclude this income from the software's Budget Reports, and to exclude the income from the software's Net Worth projections.
Both of these options are checkboxes on the Property Settlement screen.